CR40/42/50 MKII Waypoint/route menus Chapter 5
53
Route: RTE 37 0005
Course line: ON
XTE line: OFF
1: RHUMBLINE 153° 43.2nm 43.2nm
2: RHUMBLINE 219° 2.9nm 46.1nm
3: RHUMBLINE 34° 34.8nm 80.9nm
4: RHUMBLINE 234° 113.4nm 194.3nm
5: RHUMBLINE 79° 0.2nm 194.5nm
6: RHUMBLINE 112° 23.9nm 218.4nm
7: RHUMBLINE 315° 10.8nm 229.2nm
8: RHUMBLINE 279° 2.3nm 231.5nm
9: RHUMBLINE 5° 13.2nm 244.7nm
Number of points in route: 25
This display
indicates
how many
route points
are in the
route, etc.
+/-
Toggle through the stored routes with the +/- keys, or…
A-Z
Select route by entering its name (existing route)
Move the cursor up/down to select a specific routepoint
ENT
Call up the Edit route display – ifyouwishtomakeanychanges.
Edit route:
Settings for total route:
Name: RTE 37
Course line: ON
XTE: 0.10nm OFF
Navigation mode: RHUMBLINE
Settings for route leg: 5 – 6
XTE: 00.10nm
Navigation mode: RHUMBLINE
Direction in route: FORWARD
Show route as: NAVIGATION
WIN
Delete
MENU
Exit
ENT
Accept
Turning “Course line” OFF in the Route display will make the route
To Next Page
Loading...
