| 15
Specications | HS70 User Manual
PGNs with the HS70 in NMEA 2000 mode
Received messages based on a request
PG No.
(PGN)
Description Level Default
Update Rate
(msec)
Freq (Hz)
059392 ISO Acknowledgement
Used to acknowledge the status of certain
requests addressed to a specific ECU.
B On Request On
Request
059904 ISO Request
Request the transmission of a specific PGN,
addressed or broadcast.
B On Request On
Request
060928 ISO Address Claim
Used to identify to other ECUs the address
claimed by an ECU
B On Request On
Request
126996 Production Information
NMEA 2000 database version supported,
manufacturer’s product code, NMEA
2000 certification level, Load Equivalency
number, and other product-specific
information.
B On Request On
Request
126464 Receive/Transmit PGNs group function
The Transmit / Receive PGN List Group
type of function is defined by first field. The
message will be a Transmit or Receive PGN
List group function.
B On Request On
Request
129538 GNSS Control Status
GNSS common satellite receiver parameter
status.
B On Request On
Request
129545 GNSS RAIM Output
Used to provide the output from a GNSS
receiver’s Receiver Autonomous Integrity
Monitoring (RAIM) process. The Integrity
field value is based on the parameters set
in PGN 129546 GNSS RAIM Settings.
B On Request On
Request
129546 GNSS RAIM Settings
Used to report the control parameters for
a GNSS Receiver Autonomous Integrity
Monitoring (RAIM) process.
B On Request On
Request
To Next Page
Loading...
