EasyManuals Logo
Home>Simrad>Marine Equipment>NSS evo2

Simrad NSS evo2 Software Upgrade Instructions

Simrad NSS evo2
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
| 13
Update procedure | Software upgrade instructions
¼ Note: There could also be other progress messages appear on screen.
Installing update. Please wait...
Do not trun o during update, as
this may damage your device
11 Once the upgrade is complete, the unit will reboot and start normally to the accept terms and
conditions notice.
¼ Note: Some updates may contain additional drivers or processes that will require additional
auto restarts.
12 Remove the media card.
¼ Note: Software versions 52.1.103 (evo2) or higher no longer boot to an update menu. To re-
run the same up-dater over the same version, this has to be done through the user interface.
(see “Method 3: Start Update through the Files menu” on page 14)

Other manuals for Simrad NSS evo2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad NSS evo2 and is the answer not in the manual?

Simrad NSS evo2 Specifications

General IconGeneral
BrandSimrad
ModelNSS evo2
CategoryMarine Equipment
LanguageEnglish

Related product manuals