Simrad RT62 - User Programmable Fistmike Key

2.7.1 User Programmable Key
To program the user key function, turn the radio off, then press
and hold the user key on the fistmike while switching the radio
on (Fig 2.11) - the display on the radio will show UP (User
Programming).
RT62 & RT64
18
E04074
Fig 2.11 - Programming the user key to activate Dual Watch
Press and hold
while switching
the radio on
• To select backlight, press F ( on non scan versions)
• To select Dual Watch, press D/W
• To select the User Channel, press 16 (P - non scan versions)
• To select 1/25W, press 1/25
When the function has been programmed, the display will
show OK The radio should then be turned off - when it is
switched on again the radio will return to normal operation
with the fistmike user key programmed as specified.
NOTE The default setting for the fistmike user key is select User
Channel.
F
16
1/25
D/W
SCN
M+
MS