Simrad Shipmate GN30 mkII - Page 9

Activates pop-up window for plot modes to plot marks,
waypoints, routes, etc. on chart.
Toggles between four pre-selected windows. Hold two
seconds for automatic rotation of preselected displays.
Press WIN again to return to manual operation.
Turns off the menu bar. Turns off the cursor.
Deletes data, leaps to first vacant WP in WP list.
The Alpha-numeric keys inserts and selects data in data
displays. Keys 1-9 are also Quick scales i.e. selects fixed
chart scales. Key 0 will center the cursor/ship on the chart.
Turns the GN30 MKII on. Calls up an info window where
you can adjust light/contrast in screen and background
light in keypad.
Turns the GN30 MKII off.
Not funcional in this version.
4OTURNTHE'.-+))ONPRESSANDHOLDTHE[PWR]
KEYUNTILTHEREISAPICTUREONTHESCREEN
0RESS[PWR]AGAINTOADJUSTLIGHTCONTRASTANDPRESS
[ENT]TOEXITTHEFUNCTION
The unit will now perform a fully automatic start-up
and find the correct position without further data entri-
es. However, to minimize the start-up time, you can key
in the start position by pressing [MENU], [2], [7], [ENT]
and use the cursor key to place the cursor next to ,ATi-
tude, key in the start position by means of the numerical
keys and confirm with
[ENT]. The start-up phase is com-
pleted when the letter 3 (3tart-up) in the status indica-
0-9
A-Z
PLOT
WIN
CLR
PWR 
Press 2 times,
1 short + 1 long
'ETTINGSTARTED
KEYSTOPRESS
PWR 
ENTPWR 
'.-+))&UNDAMENTALSINITIALSTARTUP #HAPTER
9