To Next PageTo Next PageWhat to do if Simrad GN33 has no picture on display screen?
If there is no picture on the display screen of your Simrad GPS, first, press the [PWR] key on the keypad. If that doesn't work, replace the fuse, ensuring you use a 4.0A slow-blow type fuse.
Why is my Simrad GPS screen update extremely slow?
If the screen update on your Simrad GPS is extremely slow, turn off ‘Course line’ for each stored route and turn off ‘Display track’ .
What to do if there is no normal picture or key operation on Simrad GPS?
If your Simrad GPS shows no normal picture or the keys aren't working, try turning the unit off and on again. If that doesn't work, disconnect the power and then reconnect it. Also, remove the C-MAP chart if you suspect it might be defective.
What to do if Simrad GN33 GPS all data is deleted?
If all data is deleted from your Simrad GPS after turning it off and back on, check the battery lifetime, which should be a minimum of 5 years. The internal battery must be replaced by an authorized dealer.
How to fix no GPS position update on Simrad?
If your Simrad GPS is not updating its position, try replacing the antenna or the cable.
How to adjust brightness on Simrad GPS?
If the picture appears on the display screen, but the image is too dark or too bright, press [PWR], adjust light/ contrast, and then press [ENT].
Overview of the GN33 GPS Navigator, its features, and the purpose of the manual.
Important precautions, warnings, and guidelines for safe operation and handling of the GN33 unit.
Initial steps and procedures to begin using the GN33 GPS Navigator.
Explanation of the GN33's multi-function screen and data presentation system.
Description of the main keys and their functions on the GN33 unit.
How to access and use the menu bar for system configuration and operation.
Overview of the structure and organization of the GN33's menu system.
Explanation of the various symbols used on the GN33 display for waypoints and points.
Instructions on how to name routes, waypoints, and other data entries on the GN33.
Step-by-step guide for the initial power-on and setup process of the GN33.
Procedure for safely shutting down and turning off the GN33 GPS Navigator.
Information on using the built-in world chart and optional C-MAP electronic charts.
Instructions for inserting, removing, and testing C-MAP cartridges on the GN33.
Details on accessing and using various information windows displayed on the GN33.
How to configure chart display settings, features, and appearance on the GN33.
Explanation of how to view and interpret the GN33's position data and status indicators.
How to use and reset the dual speed display for monitoring vessel speed.
Display information for speed over ground, course, and depth readings on the GN33.
How to view and set up the speed diagram for analyzing speed trends.
Information on checking the status and reception of GPS satellites for accurate positioning.
Details on receiving and using DGPS corrections for enhanced position accuracy.
Explanation of Satellite Differential GPS (SDGPS) and its role in position determination.
How to view, edit, and manage stored waypoints on the GN33.
Information on viewing, creating, and editing stored routes on the GN33.
Using the route calculation feature for trip planning and navigation information.
How to store and edit lines on the chart for defining areas or routes.
Procedures for starting and stopping track recording on the GN33.
How to view and manage recorded tracks on the GN33.
Information on storing and displaying targets on the GN33 chart.
Description of the Highway display, a graphical steering aid for navigation.
Menu options available when a navigation mode is active on the GN33.
How to set up and use the Anchor guard feature for monitoring vessel drift.
Functionality of the Man Overboard (MOB) alarm and navigation features.
Practical examples demonstrating various navigation modes like chart/cursor, waypoint, route, and track navigation.
How to display and interpret depth and water temperature readings graphically.
Information on displaying and configuring wind data from connected instruments.
Display of the last activated Man Overboard (MOB) position.
How to receive and manage DSC alarms from a VHF radio via the GN33.
Procedures for transferring data to and from the Simrad DataCard.
How to transfer data via NMEA connection to a PC or another GN33 unit.
Configuration of speed alarms, units of measurement, and display language.
Setting up NMEA interfaces, including input/output sentences and port configurations.
Configuring alarm outputs and status levels for various GN33 functions.
Information on selecting and displaying Decca chains for navigation.
How to select and configure Loran C chains for navigation.
Customizing display colors and palettes for different viewing conditions.
Procedures for resetting the GN33 to factory defaults or deleting memory.
Important considerations and notes regarding the installation of the GN33 GPS Navigator.
Instructions for mounting the GN33 unit using various bracket and console options.
Guidelines for choosing the optimal location for the GN33 display unit.
Procedures for installing GPS and DGPS antennas for optimal reception.
Wiring diagrams and instructions for connecting power, NMEA, and other cables.
Information on connecting optional accessories like external alarms, switches, and data transfer devices.
Recommended maintenance procedures for keeping the GN33 unit clean and functional.
Guidelines for obtaining repair or service for the GN33 unit.
Common issues and solutions for troubleshooting the GN33 GPS Navigator.
Technical specifications and features of the GN33 GPS Navigator.
General
