Chapter 2-8 GN33 Fundamentals & initial start-up
correct position without further data entries. The start-up phase is
completed when a position appears in the position display - see sec-
tion 4.1.
Select display language:
MENU
Call up the menu bar, and...
7,1
press [7], [1] to call up the language display
Press up on the cursor to go to the bottom line in the display
+/-
Select language
ENT
Confirm entry
2.8 Turn power off
PWR
Call up INFO window, and...
PWR
Press and hold until screen turns black
The GN33 is now turned off. All the data and setups are saved and
stored in the internal memory and, of course, will be available next
time the unit is turned on.
To Next Page
Loading...
Need help?
General
