Simrad GN33 - 9.3 Interface setup, alarm output

Chapter 9-8 GN33 Setup menu
9.3 Interface setup, alarm output
MENU
Call up the menu bar, and...
7,3
load display for Alarm output
Interface setup, alarm:
Output (ECHO pin 3,5): ON
Alarm stand-by level: OPEN
Interface setup, pos-status:
Output (ECHO pin 1,2): ON
Pos-status stand-by level: CLOSED
Interface setup, log:
Output (ECHO pin 7,6): ON
MENU
Exit Accept
ENT
Use cursor to move around in display, and...
+/-
Toggle between available settings
ENT
Confirm entry, or...
MENU
exit function without making any changes