
Do you have a question about the Simrad GO XSE and is the answer not in the manual?
| GPS | Yes |
|---|---|
| Chartplotter | Yes |
| NMEA 2000 | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Waterproof Rating | IPX7 |
| Operating Voltage | 12V DC |
| Sonar | Yes (built-in) |
| Cartography | C-MAP, Navionics |
| Mounting Type | Bracket or Flush Mount |
| Screen Size | 7-inch, 9-inch |
| Screen Resolution | 800 x 480 pixels |
Explains how to access the Home page and its components.
Provides quick access to basic system settings via Power key or swipe.
How to power the unit on and off using the Power key or dialog.
How to create a MOB waypoint in an emergency.
Explains the components and display elements of the Chart panel.
Steps to create routes on the chart panel.
Defines waypoints, their positions, and use in routes.
Defines routes, navigation support, and route creation.
Suggests routepoint positions based on map and boat size.
How the Nav panel displays navigation information.
How to start navigating to a cursor position.
Settings for navigation methods, arrival radius, XTE limit.
Warning about autopilot not replacing a human navigator.
How to activate autopilot from panels or applications.
How to steer automatically on a set heading.
How to automatically steer to a waypoint or route.
Explains radar panel components like Range, Orientation, Motion.
Tracks up to ten radar targets for collision avoidance.
Explains the components of the Echosounder image display.
How to save waypoints from the Echosounder image.
Explains the StructureScan image view options.
Shows chart with Structure overlay combined with SideScan panel.
Explains ForwardScan image components and scales.
Remotely view and control system using wireless device.
Predefined dashboard styles for vessel, navigation, angler info.
Change data, layout, add dashboards, set limits for gauges.
How to open Audio controller, select source, and use controls.
System checks for dangerous situations and faults.
Access GoFree Shop for charts and software updates.