3D exaggeration
Graphical settings that are available in 3D mode only. Exaggeration
is a multiplier applied to the drawn height of hills on land, and
troughs in water to make them look taller or deeper.
Ú
Note: This option is grayed out if the data is not available in the
map card inserted.
Navionics charts
Some Navionics features require the most current data from
Navionics. For those features, a message is displayed stating that the
feature is unavailable if you do not have the appropriate Navionics
charts or chart card inserted. For more information on what is
required for these features, refer to www.navionics.com.
You can also get a message if you try to use a restricted feature
when the Navionics chart card is not activated. To activate the card,
contact Navionics.
46
Charts | GO XSE Operator Manual
To Next Page
Loading...
Need help?
General
