Simrad GO XSE User Manual

Using StructureMap with mapping cards
StructureMap allows you to maintain full chart capability and can be
used with embedded cartography as well as Navionics, Insight and
other third-party charting cards compatible with the system.
When using StructureMap with mapping cards, copy the
StructureMap (.smf ) files to the unit’s internal memory. We
recommend keeping copies of StructureMap files on external
mapping cards.
Structure options
You adjust the StructureMap settings from the Structure options
menu. The menu is available when Structure overlay is enabled.
Not all options are available when saved StructureMap files are used
as the source. Unavailable options are greyed.
Range
Sets the search range.
Transparency
Sets the opaqueness of the Structure overlay. With minimum
transparency settings, the chart details are almost hidden by the
StructureMap overlay.
Palette
Selects Structure palette.
Contrast
Determines the brightness ratio between light and dark areas of the
screen.
Water column
Shows/hides the water column in Live mode.
If turned OFF schools of bait fish might not be seen on the SideScan
image.
If turned ON the accuracy of the SideScan image on the map might
be affected by the water depth.
StructureMap | GO XSE Operator Manual
135

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels