Simrad GO XSE User Manual

Fuel gauge
The Fuel Gauge on the TripIntel page, and on the economy gauge is
displayed based on the setting in the Vessel Setup page. You must
select the Fuel Remaining measurement type.
• Fuel consumed by engine(s)
• Fuel tank level sensor(s)
Ú
Note: This is only for the TripIntel page and the economy
graph.
Record your refueling
Select the Fuel button to record the amount of your refuel. The
refuel information is used for calculating the Vessel Fuel Remaining
amount.
Tide gauge
The Tide gauge on the TripIntel page shows the tide height at the
selected tide station.
Tide graphs and stations
Tide stations on Chart cards provide tide information. Select the
Tide button to view tide graphs and specify which Tide station
provides tide information. If no tide station is chosen, tide
information from the nearest tide station is used.
72
TripIntel | GO XSE Operator Manual

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels