Simrad GO XSE User Manual

Create StructureMap
If a StructureScan transducer is connected to the unit, you can
convert the .sl2 or .sl3 logs to StructureMap format (.smf) when
recording completes. The log file can also be converted to
StructureMap format from the Files option.
Upload to Insight Genesis
Files are transmitted to Insight Genesis when recording completes,
if you are connected to a wireless hotspot. For information about
wireless hotspots, refer to "Wireless connection" on page 143.
Privacy
If allowed by your selected Insight Genesis account, you can choose
between setting the recorded log files as Private or Public at Insight
Genesis.
Time remaining
Shows the remaining allocated space available for recordings.
Stop recording log data
Select Stop in the Recording Echo dialog to fully stop the recording
of all echosounder data.
Ú
Note: If you have selected the Upload to Insight Genesis
option and are connected to a wireless hotspot, your recorded
files are transmitted to Insight Genesis when you select Stop.
Viewing the recorded sounder data
Both internally and externally stored sounder records may be
reviewed when the view sonar log option is selected in the Echo
settings dialog. Refer to "Echosounder settings" on page 124.
Echosounder | GO XSE Operator Manual
121

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels