Simrad GO XSE User Manual

Radar settings
Radar symbology
You can select which optional radar items that should be turned
on/off collectively from the menu. Refer to the Radar panel
illustration.
Bearings
Used for selecting whether the radar bearing should be measured
in relation to True/Magnetic North (°T/°M) or to your relative
heading (°R).
Data bar
Turns on/off the radar data bar. Refer to the radar panel illustration.
The data bar can show up to 3 targets, arranged with the most
dangerous targets on top. You can select to show MARPA targets
on top and before any AIS targets, even if the AIS targets are closer
to your vessel.
MARPA settings
You can define the length of the MARPA trail making it easier to
follow target movement.
A circle can be added around your vessel to present the danger
zone. The radius of the ring is the same as the closest point of
112
Radar | GO XSE Operator Manual

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels