Simrad GO XSE User Manual

Chart data
The system is delivered with different embedded cartography
depending on region.
All units support Insight charts from Navico including Insight
Genesis. The system also supports charts from Navionics and C-MAP
as well as content created by a variety of third party mapping
providers in the AT5 format. For a full selection of available charts,
visit www.gofreeshop.com, www.c-map.com, or
www.navionics.com.
Ú
Note: In this manual, all possible chart menu options are
described. These options vary depending on the chart you are
using.
Ú
Note: The system does not automatically switch to embedded
cartography if the chart card is removed. A low-resolution chart
will be displayed until you re-insert the card or manually switch
back to the embedded cartography.
Showing dual chart types
If you have different chart types available - embedded or in the card
slot - you can show two different chart types simultaneously on a
page with two chart panels.
You can select a dual chart panel by pressing and holding the Chart
application button on the Home page, or by creating a favorite
page with two chart panels.
34
Charts | GO XSE Operator Manual

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels