Simulator
The simulation feature lets you see how the unit works in a
stationary position and without being connected to sensors or
other devices.
The status bar indicates if the simulator is toggled on.
Demo mode
In this mode the unit automatically runs through the main features
of the product; it changes pages automatically, adjusts settings,
opens menus, etc.
If you tap on the touchscreen when demo mode is running, the
demonstration pauses. After a time-out period, demo mode
resumes and any changed settings are restored to default.
Ú
Note: Demo mode is designed for retail/showroom
demonstrations.
Simulator source files
You can select which data files are used by the simulator. A set of
source files is included in your system, and you can import files by
using a card inserted into the card reader. You can also use your
own recorded log data files in the simulator.
22
186
Simulator | GO XSE Operator Manual
To Next Page
Loading...
Need help?
General
