Navigating
The navigation function included in the system allows you to
navigate to the cursor position, to a waypoint, or along a predefined
route.
If autopilot functionality is included in your system, the autopilot
can be set to automatically navigate the vessel.
For information about positioning waypoints and creating routes,
refer to "Waypoints, Routes, and Tracks" on page 55.
Navigation panels
The Nav panels can be used to display information when you are
navigating.
The Nav panel
The Nav panel is activated from the Home page, either as a full page
panel or as part of a multiple panel page.
1 Data fields
2 Route information
3 Vessel heading
6
64
Navigating | GO XSE Operator Manual
To Next Page
Loading...
