To Next Page

To Previous Page

7 Range rings*

8 Range markers*

9 Data bar

* Optional radar symbology.

Radar symbology can be turned ON/OFF collectively from the Radar

menu, or individually as described in "Radar settings panel" on page 112.

Dual radar

You can connect to any combination of two supported radars and

see both radar images at the same time.

Note: Interference will be seen on the Broadband Radar on

most ranges when a pulse or Halo radar, and a Broadband radar

are transmitting at the same time on the same boat. We

recommend to only transmit on one radar at a time. For

example, transmit Broadband radar for typical navigational

usage, or pulse or Halo radar to locate weather cells, defined

coastlines at a distance and to trigger Racons.

You can select a dual radar panel by pressing and holding the Radar

application button on the Home page, or by creating a favorite

page with two radar panels.

Selecting the radar source

You specify the radar in the Radar panel by selecting one of the

available radars in the radar source menu option. If you have a

multiple Radar panel, the radar is set individually for each radar

panel. Activate one of the radar panels, and then select one of the

available radars in the radar source menu option. Repeat the

process for the second radar panel, and select an alternative radar

for this panel.

Note: The 3-digit radar source number is the last 3 digits of the

radar's serial number.

Radar overlay

You can overlay the Radar image on the Chart. This can help you to

easily interpret the radar image by correlating the radar targets with

charted objects.

Radar | GO XSE Operator Manual

Simrad GO XSE User Manual

Other manuals for Simrad GO XSE