When a target is selected, detailed information for the target can be
displayed from the menu.
You can display information about all MARPA targets by using the
Vessels option on the Home page.
MARPA alarm settings
You can define the following MARPA alarms:
• MARPA target lost
Controls whether an alarm is activated when a MARPA target is
lost.
• MARPA unavailable
Controls whether an alarm is activated if you do not have the
required inputs for MARPA to work (valid GPS position and
heading sensor connected to the radar server).
Recording radar data
You can record radar data and save the file internally in the GO XSE
unit, or save it onto a memory card inserted into the unit’s card
reader.
A recorded radar file can be used for documenting an event or an
operational error. A logged radar file can also be used by the
simulator.
If more than one radar is available, you can select which source you
want to record.
Radar | GO XSE Operator Manual
111
To Next Page
Loading...
Need help?
General
