Need help?Do you have a question about the Simrad GO7 and is the answer not in the manual?
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Networking | NMEA 2000 |
| Bluetooth | Yes |
| Chartplotter | Yes |
| Display Size | 7 inch |
| GPS Type | Internal |
| Wireless Connectivity | Wi-Fi |
| Chart Compatibility | C-MAP, Navionics |
| Display Type | TFT LCD |
| SD Card Slots | 1 |
| Sonar Compatibility | CHIRP |
| Radar Compatibility | Yes |
| Operating Temperature | -15°C to 55°C |
| Sonar | Broadband, CHIRP, DownScan, SideScan (with compatible transducer) |
General information on product updates, user responsibility, and liability limitations.
List of registered trademarks associated with Navico and its products.
Copyright notice and details regarding the product's warranty information.
Details on the GO7's compliance with relevant directives and standards.
Specifies the software version for which this manual is written and how to get updates.
Describes how to access and navigate the GO7's main Home screen interface.
How applications are presented on the GO7 display in full or split panel configurations.
Instructions for customizing and managing user-defined favorite page layouts.
Enables display and interaction with Mercury SmartCraft data via NMEA 2000.
Allows control of FUSION marine entertainment systems through the GO7.
Integrates with BEP CZone for distributed power system control and monitoring.
Provides wireless connectivity for remote viewing and control of the GO7 unit.
Details on connecting and using external remote control units for the GO7.
Accessing key system settings and functions through a dedicated dialog box.
Step-by-step guide to powering the GO7 unit on and off correctly.
Adjusting screen brightness and activating night mode for optimal visibility.
Securing the touchscreen interface to prevent accidental inputs during operation.
Navigating and interacting with the GO7's menu structure and dialog boxes.
Switching between different application views and panel arrangements on the display.
Guide to using the on-screen cursor for precise selection, measurement, and navigation.
Utilizing the cursor to accurately measure distances between points on the chart or sonar image.
Procedure for marking a Man Overboard position for immediate navigation back.
Instructions on how to capture screenshots of the GO7 display for documentation or sharing.
Setting a custom background image for the GO7's Home screen.
Resizing individual panels within split-screen views for better layout and visibility.
Creating and saving custom page configurations for quick access to preferred layouts.
Modifying existing favorite pages by adding or removing panels and reconfiguring layout.
Customizing the display options and content of the Instrument bar.
Explanation of the graphical elements and information displayed on the chart panel.
Details on available cartography sources, including Insight, Navionics, and C-MAP.
Enables displaying two different chart types simultaneously on the screen.
Procedure for choosing the desired chart source and type for display.
Description of the icon representing the vessel's current position and status on the chart.
Methods for adjusting the zoom level and scale of the chart display for detailed viewing.
How to move the chart view across the screen to explore different areas.
Options for orienting the chart display relative to the vessel's heading or north.
Accessing detailed data for waypoints, routes, and other chart objects.
Step-by-step guide to planning and creating navigation routes on the chart.
Utilizing the three-dimensional perspective for enhanced chart visualization and terrain understanding.
Customizing the visual style and detail levels for Insight chart data.
Adjusting visual elements and data layers specific to Navionics cartography.
Configuring specific display settings for Navionics charts, including depth, annotation, and presentation types.
Customizing visual aspects of Navionics charts, such as shading and dynamic tide/current icons.
Highlighting specific depth ranges on the chart for fishing or navigation purposes.
Visually marking areas of shallow water on the chart for safety.
Displaying and interpreting tidal and current data from Jeppesen charts.
General configuration options for chart display, including 3D boat selection and range rings.
Creating, saving, editing, and moving waypoints for navigation and marking positions.
Planning, creating, editing, and navigating along sequences of waypoints.
Features for automatically generating optimal navigation routes based on vessel and chart data.
Recording, viewing, and managing the vessel's historical path data.
Configuring parameters for track recording, such as logging type and frequency.
Accessing advanced editing and management interfaces for navigation data.
Displaying critical navigation information such as distance, speed, and heading.
Initiating navigation towards a specific point selected on the screen.
Following a predefined route for automated or assisted navigation.
Integrating autopilot for hands-free steering during navigation tasks.
Adjusting parameters that affect navigation, including methods, limits, and alarms.
Essential safety precautions and warnings for using the autopilot effectively.
Procedures for engaging the autopilot and selecting an initial steering mode.
Safely disengaging the autopilot and taking manual control of the vessel's steering.
Understanding the visual cues on the display that indicate autopilot status and activity.
Controlling autopilot functions and modes through the on-screen pop-up interface.
Descriptions of the various steering modes available for the autopilot system.
Using standby mode for manual steering and system readiness.
Operating the autopilot using the NFU mode for direct rudder control.
Utilizing FU mode with external controllers for precise rudder angle adjustments.
Engaging automatic steering based on the current compass heading.
Maintaining a precise track line by compensating for drift using GPS data.
Steering the vessel automatically towards a waypoint or along a predefined route.
Steering the vessel based on wind angle for optimized sailing performance.
Executing automated turning maneuvers like spirals, zigzags, and squares.
Automatically following specific underwater depth contours for detailed seabed analysis.
Integrating the GO7 with Simrad AP24/AP28 autopilot control units.
Connecting and controlling the autopilot via an EVC system for enhanced steering.
Configuring various autopilot parameters, including response, sailing, and filters.
Identification of key components and indicators displayed on the echosounder screen.
Employing the cursor for precise target selection, distance measurement, and data analysis.
Reviewing past echosounder data by panning through recorded images.
Configuring echosounder display parameters like range, frequency, gain, and color.
Saving echosounder data logs to internal memory or a memory card for later analysis.
Adjusting general display and performance settings for the echosounder system.
Understanding the visual elements and information presented in the DownScan image.
Adjusting the magnification of DownScan images using zoom controls.
Utilizing the cursor for precise selection and measurement within DownScan images.
Reviewing past DownScan data by panning through recorded images.
Configuring DownScan image parameters like range, frequency, and contrast.
Saving DownScan data logs for later review or analysis.
Interpreting the various icons used to represent AIS targets on the chart display.
Accessing detailed information about detected AIS targets, including vessel identity and status.
Initiating DSC calls to other vessels identified via the AIS system.
Receiving and responding to signals from AIS SART search and rescue beacons.
Configuring alarms for vessel proximity, loss, or received messages to enhance safety.
Inputting and managing vessel-specific information, such as MMSI number, for system identification.
Establishing guard zones and alerts for vessels identified as dangerous based on CPA/TCPA settings.
Selecting and viewing predefined sets of gauges for vessel, navigation, and angler information.
Customizing dashboard layouts, selecting gauges, and configuring data sources for display.
Activating support for compatible audio devices connected via NMEA 2000.
Accessing and managing audio sources, playback controls, and settings.
Understanding the function of icons used to control audio playback, sources, and volume.
Utilizing additional tools for audio system setup, zone management, and fine-tuning.
Configuring speaker zones, volume limits, and master volume for the audio system.
Creating and managing lists of preferred radio or VHF channels.
Features and settings for Sirius satellite radio reception.
Choosing data types and time ranges to display on time plot panels.
Overview of how the GO7 system continuously monitors for hazards and faults.
Classification of alarm messages based on severity and color coding.
Procedures for acknowledging and clearing active alarm messages from the system.
Accessing alarm settings, history, and managing active alarms through a dedicated dialog.
Managing saved navigation data, including lists, editing, and deletion.
Reviewing active alarms, alarm history, and configuring alarm settings.
Accessing system-wide and application-specific configuration options.
Viewing status and information for detected AIS and DSC vessels.
Using the search function to locate chart items, waypoints, routes, and tracks.
Automatic demonstration of unit features for retail or showroom purposes.
Selecting or importing data files to simulate various operational scenarios.
Manually configuring simulator parameters for GPS source, speed, course, and starting position.
Recommended basic maintenance tasks to ensure the longevity of the GO7 unit.
Guidelines for safely cleaning the screen and bezel to prevent damage.
Information on downloading and installing the latest software updates for the GO7.
Procedures for backing up waypoints, routes, tracks, and system settings to a memory card.
Backing up specific navigation data types by exporting them to a file.
Basic gestures and interactions for operating the GO7's touchscreen interface.
To Next Page
