Simrad GO7 User Manual

Icon filters
By default, all targets are shown on the panel if an AIS device is
connected to the system.
You can select not to show any targets, or to filter the icons based
on security settings, distance, and vessel speed.
Extension lines
The length of the extension lines for your vessel and for other
vessels can be set by the user.
• A: Heading
• B: Course Over Ground (COG)
The length of the extension lines is either set as a fixed distance, or
to indicate the distance the vessel will move in the selected time
period. If no options are turned on for This vessel then no
extension lines are shown for your vessel.
Your own vessel heading information is read from the active
heading sensor, and COG information is received from the active
GPS.
AIS | GO7 Operator Manual
93

Simrad GO7 Specifications

General

Resolution	800 x 480 pixels
Touchscreen	Yes
Networking	NMEA 2000
Bluetooth	Yes
Chartplotter	Yes
Display Size	7 inch
GPS Type	Internal
Wireless Connectivity	Wi-Fi
Chart Compatibility	C-MAP, Navionics
Display Type	TFT LCD
SD Card Slots	1
Sonar Compatibility	CHIRP
Radar Compatibility	Yes
Operating Temperature	-15°C to 55°C
Sonar	Broadband, CHIRP, DownScan, SideScan (with compatible transducer)