Edit favorite pages
1. Select the edit icon for a favorite icon to enter edit mode
- Select the X icon to remove the page
- Select the tool icon to display the page editor dialog
2. Add or remove panels in the page editor dialog.
3. Save or discard your changes to leave the favorite edit mode.
Setting the appearance of the Instrument
bar
Data sources connected to the system can be viewed in the
Instrument bar.
You can configure the Instrument bar to display either one or two
bars, or set it to alternate the bars automatically.
You can turn the Instrument bar off from the System controls
dialog.
Ú
Note: This only turns the Instrument bar off for the current
page.
Turning the Instrument bar on/off
1. Activate the System controls dialog
2. Deactivate/activate the instrument bar icon to toggle the bar on
and off.
Edit the content of the Instrument bar
1. Select the MENU button to edit the content
2. Select the content you want to display
Ú
Note: You can configure Bar 1 for active page or for all
pages except those that have a local configuration. Bar 2
can only be configured for active page.
3. Define the time period if you want the two bars to alternate
automatically
4. Select the edit option to change any of the instrument fields,
followed by the field you want to change
5. Save your changes by selecting the finish edit option in the
menu.
26
Customizing your system | GO7 Operator Manual
To Next Page
Loading...
Need help?
General
