AIS vessel lost
Sets the range for lost vessels. If a vessel is lost within the set range,
an alarm occurs.
Ú
Note: The check box controls whether the alarm pop-up
box is displayed and if the siren goes on. The CPA and TCPA
define when a vessel is dangerous regardless of the
enabled or disabled state.
Vessel message
Controls whether an alarm will be activated when a message is
received from an AIS target.
Vessel settings
Your vessel’s MMSI number
You need to have your own MMSI (Maritime Mobile Service Identity)
number entered in the system to receive addressed messages from
AIS and DSC vessels.
It is also important to have the MMSI number entered to avoid
seeing your own vessel as an AIS target on the chart.
Ú
Note: The Vessel message option in the alarm settings
must be toggled on for any MMSI message to be displayed.
92
AIS | GO7 Operator Manual
To Next Page
Loading...
