Simrad GO7 User Manual

Calling an AIS vessel
If the system includes a VHF radio supporting DSC (Digital Select
Calling) calls over NMEA 2000, you can initiate a DSC call to other
vessels from the GO7.
The call option is available in the AIS Vessel Details dialog, and in
the Vessel status dialog activated from the Tools panel.
From the Call dialog you can change channel or cancel the call. The
Call dialog is closed when the connection is established.
AIS SART
When an AIS SART (Search and Rescue beacon) is activated, it starts
transmitting its position and identification data. This data is received
by your AIS device.
If your AIS receiver is not compliant with AIS SART, it interprets the
received AIS SART data as a signal from a standard AIS transmitter.
An icon is positioned on the chart, but this icon is an AIS vessel icon.
AIS | GO7 Operator Manual
89

Simrad GO7 Specifications

General

Resolution	800 x 480 pixels
Touchscreen	Yes
Networking	NMEA 2000
Bluetooth	Yes
Chartplotter	Yes
Display Size	7 inch
GPS Type	Internal
Wireless Connectivity	Wi-Fi
Chart Compatibility	C-MAP, Navionics
Display Type	TFT LCD
SD Card Slots	1
Sonar Compatibility	CHIRP
Radar Compatibility	Yes
Operating Temperature	-15°C to 55°C
Sonar	Broadband, CHIRP, DownScan, SideScan (with compatible transducer)