Routes
A route consists of a series of routepoints entered in the order that
you want to navigate them.
When you select a route on the chart panel it turns green, and the
route name is displayed.
The system includes support for Navionics Autorouting and
Jeppesen Easy Routing. This feature automatically suggests
routepoints between the first and last routepoint of a route, or
between selected routepoints in a complex route. You can use the
feature when you create a new route, or you can use it to edit
already saved routes.
Creating a new route on the chart panel
1. Activate the cursor on the chart panel.
2. Select the new route option from the menu.
3. Position the first waypoint on the chart panel.
4. Continue positioning new routepoints on the chart panel until
the route is completed.
5. Save the route by selecting the save option in the menu.
Edit a route from the chart panel
1. Select the route to make it active.
2. Select the route edit option in the menu.
3. Position the new routepoint on the chart panel:
- If you set the new routepoint on a leg, a new point is added
between existing routepoints.
- If you set the new routepoint outside the route, the new
routepoint is added after the last point in the route.
4. Drag a routepoint to move it to a new position.
5. Save the route by selecting the save option in the menu.
Ú
Note: The menu changes depending on the selected edit
option. All edits are confirmed or cancelled from the menu.
44
Waypoints | GO7 Operator Manual
To Next Page
Loading...
Need help?
General
