using a card inserted into the card reader. You can also use your
own recorded files in the simulator.
Advanced simulator settings
The Advanced simulator settings allows for manually controlling the
simulator.
GPS source
Selects where the GPS data is generated from.
Speed, Course and Route
Used for manually entering values when GPS source is set to
Simulated course or Simulated route. Otherwise, GPS data including
speed and course come from the selected source file.
Set start position
Moves your vessel to the current cursor position.
Ú
Note: This option is only available when the GPS source is
set to Simulated course.
Simulator | GO7 Operator Manual
109
To Next Page
Loading...
