Audio
If a SonicHub server or a FUSION marine entertainment system is
connected to the NMEA 2000 network, you can use the GO7 to
control and customize the audio system on your vessel.
Before you can start using your audio equipment, it must be
installed according to the GO7 Installation manual and to the
documentation included with the audio device.
Enabling audio
A compatible audio device connected to the NMEA 2000 network
should automatically be identified by the system. If not, enable the
feature from the Advanced Settings dialog.
The Audio panel
You activate the audio panel by activating the audio tile in the
Instrument bar.
The control buttons, tools and options vary from one audio source
to another as described later in this chapter.
12
Audio | GO7 Operator Manual
97
To Next Page
Loading...
