Setting up the audio system
The speakers
Speaker zones
The GO7 can be set up to control different audio zones. The number
of zones depends on the audio server connected to your system.
You can adjust balance, volume and volume limit settings
individually for each zone. Adjustments to the bass and tremble
settings will alter all zones.
Master volume control
By default the volume for all speaker zones are adjusted when you
adjust the volume. You can define which zones will be altered when
you increase/decrease the volume.
Selecting tuner region
Before playing FM or AM radio, and using a VHF radio, you must
select the appropriate region for your location.
Detaching Sirius from the AUX source
If a Sirius radio is connected to the FUSION radio/server, the AUX
source is automatically attached to the Sirius feed. Sirius then
appears in the source list when the FUSION server is active.
To use the AUX source for a different device, the Sirius must be
detached from the AUX source.
Ú
Note: To use SiriusXM, an optional SiriusXM tuner must be
connected to the FUSION server.
Operating the audio system
1. Select the Audio tile in the Instrument bar to activate the Audio
overlay
2. Select the options icon and then select the audio server
3. Select the source icon and then select the audio source
- Number of sources depends on the active audio server
4. Use the panel buttons to control your audio system
100
Audio | GO7 Operator Manual
To Next Page
Loading...
Need help?
General
