Simrad GO7 - Using Menus and Dialogs; Selecting Pages and Panels

You lock the touchscreen from the System Controls dialog.
You remove the lock function by a short press on the Power key.
Using menus and dialogs
Menus
You display a page menu by selecting the MENU button in the
upper right corner of the page.
• Activate a menu item and toggle on/off an option by selecting
it
• Adjust a slide bar value by either:
• dragging the slide bar
• selecting the + or - icons
Select the Back menu option to return to the previous menu level,
and then exit.
You can make the menu slide away by tapping the screen outside
the menu area, or by pressing the MENU button. When you re-
press the MENU button, the menu opens in the same status it had
before it closed.
The status of the cursor (active vs. inactive) changes the menu
options.
Selecting pages and panels
Selecting a page
• Select a full page panel by selecting the relevant application
button on the Home page
• Select a favorite page by selecting the relevant favorite button
• Select a predefined split panel by pressing and holding the
relevant application icon
Select active panel
In a multiple panel page, only one panel can be active at a time. The
active panel is outlined with a border.
You can only access the page menu of an active panel.
You activate a panel by tapping it.
20
Basic operation | GO7 Operator Manual