If your AIS receiver is compliant with AIS SART, the following takes
place when AIS SART data is received:
• An AIS SART icon is located on the chart in the position received
from the AIS SART
• An alarm message is displayed
If you have enabled the siren, the alarm message is followed by an
audible alarm.
Ú
Note: The icon is green if the received AIS SART data is a
test and not an active message.
AIS SART alarm message
When data is received from an AIS SART, an alarm message is
displayed. This message includes the AIS SART’s unique MMSI
number, and its position, distance, and bearing from your vessel.
You have three options:
1. Ignore the alarm
- The alarm is muted and the message closed. The alarm does
not reappear
2. Save the waypoint
- The waypoint is saved to your waypoint list. This waypoint
name is prefixed with MOB AIS SART - followed by the unique
MMSI number of the SART. For example, MOB AIS SART -
12345678.
3. Activate the MOB function
- The display switches to a zoomed chart panel, centered on
the AIS SART position
- The system creates an active route to the AIS SART position
When data is received from an AIS SART, an alarm message is
displayed. This message includes the AIS SART’s unique MMSI
number, its position and its distance and bearing from your vessels.
90
AIS | GO7 Operator Manual
To Next Page
Loading...
Need help?
General
