Simrad GO XSE User Manual

You can adjust balance, volume and volume limit settings
individually for each zone. Adjustments to the bass and tremble
settings will alter all zones.
Master volume control
By default the volume for all speaker zones are adjusted when you
adjust the volume. You can define which zones will be altered when
you increase/decrease the volume.
Selecting tuner region
Before playing FM or AM radio, and using a VHF radio, you must
select the appropriate region for your location.
Favorite channels
When a tuner or VHF channel is tuned in, you can add the channel
to your favorite list. The favorite channels can be viewed, selected
and deleted from within the Favorite list.
You page through favorite channels by using the up/down Audio
controller buttons.
SonicHub 2
A SonicHub 2 connected to the NMEA 2000 network is supported.
SonicHub 2 Device Information
Open the Network Settings dialog and select the SonicHub 2 device
in the Device list. This opens the SonicHub 2 Device Information
dialog.
164
Audio | GO XSE Operator Manual

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels