Configure
Select to configure the device.
Upgrade
Updates the device software.
Ú
Note: A USB memory stick with the software upgrade must be
plugged into the device. Periodic software updates may be
available from the product website. Detailed instructions for
how to install the software are included with the upgrade files.
Factory Reset
Resets the device to factory defaults.
SonicHub 2 is Bluetooth enabled
The SonicHub 2 is a Bluetooth enabled device. You can use the
SonicHub 2's built-in Bluetooth wireless to connect it to Bluetooth
enabled audio devices.
To pair the SonicHub 2 to a Bluetooth enabled device select the
Bluetooth devices icon in the Audio controller. Choose the
Bluetooth device you want to pair to from the list of available
devices and then select Pair.
Audio | GO XSE Operator Manual
165
To Next Page
Loading...
