Navionics specific chart options
Orientation, Look ahead, 3D and change Chart source (previously
described in this section) are common for all chart types.
Community edits
Toggles on the chart layer including Navionics edits. These are user
information or edits uploaded to Navionics Community by users,
and made available in Navionics charts.
For more information, refer to Navionics information included with
your chart, or to Navionics website: www.navionics.com.
SonarChart Live
SonarChart Live is a real-time feature where the device creates an
overlay of depth contours based on your own live sonar soundings.
In the Navionics chart menu, select Overlay and then SonarChart
Live to display it as an overlay on the chart.
When you select SonarChart Live overlay the menu expands to
display SonarChart Live Options. Use the options to set the
transparency and minimum depth.
Transparency
The SonarChart Live overlay is drawn on top of other chart data. The
chart data is completely covered at minimum transparency. Adjust
the transparency to allow the chart details to be seen.
Minimum depth
Adjusts what SonarChart Live rendering treats as the safety depth.
This affects the coloring of the SonarChart Live area. As the vessel
approaches the safety depth, the SonarChart Live area will gradually
change from a simple grey/white to red.
SCL History
Ú
Note: If no active Navionics chart subscription is found, the
SonarChart Live menu option changes to SCL History.
Select to display previously recorded data on the chart overlay.
Charts | GO XSE Operator Manual
47
To Next Page
Loading...
Need help?
General
