Simrad GO XSE User Manual

When the data is being recorded, there is a flashing red symbol in
the top left corner and a message appears periodically at the
bottom of the screen.
Filename
Specify the name of the recording (log).
File format
Select a file format from the drop-down, slg (Echosounder only), xtf
(Structure only*), sl2 (Echosounder and Structure) or sl3 (includes
StructureScan 3D).
Ú
Note: XTF format is for use only with select 3rd party
Echosounder viewing tools.
Save to
Select whether the recording is to be saved internally or to a
memory card in the card reader.
Bytes per sounding
Select how many bytes per seconds that are to be used when
saving the log file. More bytes yield better resolution, but cause the
record file to increase in size compared to using lower byte settings.
120
Echosounder | GO XSE Operator Manual

Simrad GO XSE Specifications

General

GPS	Yes
Chartplotter	Yes
NMEA 2000	Yes
Wi-Fi	Yes
Bluetooth	Yes
Waterproof Rating	IPX7
Operating Voltage	12V DC
Sonar	Yes (built-in)
Cartography	C-MAP, Navionics
Mounting Type	Bracket or Flush Mount
Screen Size	7-inch, 9-inch
Screen Resolution	800 x 480 pixels