GN33 Pilot menu & navigation examples Chapter 6-11
Press the cursor key to activate the cursor, then move the cursor to
your destination
GOTO
Call up “Select NAV mode” window, and...
1
select “Cursor”
A course line will now be drawn from actual position (ship’s posi-
tion) to destination point (cursor’s position).
Next destination: While on the way, you can easily move the cursor
to the next destination, and when ready to change navigation leg...
GOTO
Press [GOTO] and [2] to...
2
“Restart to approaching point”
- a new course line will be drawn from ship’s position to destination.
To turn NAV mode off again:
GOTO
Press [GOTO] and [3] to...
3
“Turn NAV off” from active chart display
or...
MENU
Press [MENU] and [4], [2] to...
4,2
“Turn NAV off” via the menu
6.5.2 Waypoint navigation
There are two ways of activating Waypoint navigation:
From the chart display using [GOTO] or from the menu system.
From the chart:
CHART
Shortcut to chart display
Place cursor on destination waypoint
GOTO
Select NAV mode, and...
To Next Page
Loading...
Need help?
General
