Simrad GN33 User Manual

GN33 Chart menu and INFO windows Chapter 3-11
3.3.5 Cursor placed on routepoint or linepoint
ENT
With chart in active page, and cursor placed on a routepoint or line-
point, press [ENT] to call up an info window with the following to
choose from:
Routepoint found 5
Name: RTE 1
From start: 108.8nm
To end: 34.26nm
1
Edit user data
2
Chart info
Refer to Appendix C
3
Find nearest port services
Refer to Appendix C
4
Bearing and dist from A to B
Refer to section 3.3.2
9
Chart setup
Refer to section 3.4
0
Cursor to center
Refer to section 3.3.2
PAGE
More user data
MENU
Exit
Exit info window
1
Edit user data opens for a new info window:
Routepoint
1
Edit point
Open new info window to edit routepoint
2
Move point
Move point with cursor
CLR
Delete point
Delete routepoint
3
Add point
Add point to route - in beginning or at end.
4
Edit
Open new info window to edit route
5
Delete
Delete the whole route
MENU
Exit
Exit info window
PAGE
More user data will toggle between data on routepoint and route leg

Simrad GN33 Specifications

General

Brand	Simrad
Model	GN33
Category	GPS
Language	English