17
② Sleep function will be cancelled when turning off the unit or switching modes.
3.7.3 Health Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
health function and press “
＜
” or “
＞
” button to turn on or turn off health
function with auto saving.
3.7.4 I-DEMAND Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
IDEMAND function option and press “
＜
” or “
＞
” button to turn on or turn
off this function with auto saving.
Note:
① This function is only available in cooling mode.
② When this function has been set, set temperature is displayed in 27℃(81℉).
In this case, temperature setting and fan speed setting are shielded.
③ This function will be cancelled when turning off the unit or switching modes.
④ This function and sleep function cannot be on simultaneously. If I-demand
function is set firstly and then sleep function is set, I-demand function will be
cancelled while sleep function will be valid, and vice versa.
To Next Page
Loading...
