Sinclair SWC-03 - Page 23

18
3.7.5 Absence Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
holiday function option and press “
＜
” or “
＞
” button to turn on or turn off
this function with auto saving.
This function is used to maintain indoor temperature so that unit can
realize fast heating.
Note:
① This function is only available in heating mode;
② When this function has been set, set temperature is displayed in 8℃(46℉).
In this case, temperature setting and fan speed setting are shielded;
③ This function will be cancelled when switching modes;
④ This function and sleep function cannot be on simultaneously. If absence
function is set firstly and then sleep function is set, absence function will be
cancelled while sleep function will be valid, and vice versa.
3.7.6 Memory Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
memory function and press “
＜
” or “
＞
” button to turn on or turn off
memory function with auto saving.