Sinclair SWC-03 - Unit Status View

23
3.7.14 Low-temperature Drying Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
low-temperature drying function and press “
＜
” or “
＞
” button to turn on or
turn off this function with auto saving.
Note:
① This function is only available in dry mode;
② When low-temperature drying function is on, the displayed set temperature in
dry mode is 12 ℃ (54 ℉ ). This function will be off automatically after
readjusting set temperature.
3.8 Unit Status View
Press MENU button to enter the menu and select the function
symbol to be viewed. Then press MENU button to enter view function
page. Press “
∧
” or “
∨
” button to select status view function. Press
MENU button to enter unit status view page. Press BACK button to return
to the last page. Please refer to Fig. 9.
The following statuses can be viewed: if defrosting is operating; if
auxiliary heating is operating; residual time of filter cleaning reminder;
indoor ambient temperature; outdoor ambient temperature.