22
decrease.
This function is used to remind you to clean the filter when the unit’s
own operating time is reach your setting.
Whenever you turn off this function, the unit’s operating time will be
zero clearing.
3.7.12 Fahrenheit Temperature Setting
After entering user function page, press “
∧
” or “
∨
” button to select
Fahrenheit temperature function and press “
＜
” or “
＞
” button to turn on
or turn off this function with auto saving. After closing this function,
Celsius temperature will be displayed.
3.7.13 Fixed-angle Swing Mode Setting
After entering user function page, press “
∧
” or “
∨
” button to select
lock swing function option and press “
＜
” or “
＞
” button to turn on or turn
off this function with auto saving.
Note: If fixed-angle swing function is not available for the connected
unit, this function will be cancelled automatically after setting.
To Next Page
Loading...
