Sinclair SWC-03 - Page 25

20
3.7.9 X-fan Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
dry function option and press “
＜
” or “
＞
” button to turn on or turn off this
function with auto saving.
Note:
① This function is only available in cooling mode and dry mode;
② When this function is on, if the air conditioner is turned off, the indoor fan will
still operate at low speed for a while to blow the residual water inside the air
duct.
3.7.10 Quiet Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select
quiet function and press “
＜
” or “
＞
” button to turn on or turn off this
function with auto saving.
Note: This function is only available in cooling mode, heating mode
and auto mode.