10
3.3
Mode Setting
Under power-on status, each time press the “MODE” button, the mode will
switch circularly according to the following order, as shown in the figure.
Figure 3-4 Mode Setting
Note:
Under auto mode, if the unit conducts auto cooling, then“
” and “ ” turn on; if
the unit conducts auto heating, then“ ” and “ ”turn on.
3.4
Setting of Temperature
Under power-on status, press “▲” or “▼” button, the setting temperature will
increase or decrease at the unit of 1℃; when press and hold the button, it will
increase or decrease at the unit of 1℃ in every 0.3 second. Operation is as below:
To Next Page
Loading...
