STORING DATA IN MEMORY

The additional memory in your Spectrum 128 can be used for running large machine code programs. It can also be

used by BASIC to store programs and data in much the same way as a cassette or Microdrive - but many times

faster.

This type of storage is called a RAM disk and it allows BASIC programs to manipulate data in much the same way as

professional programs on big machines.

An important difference between RAM storage and a cassette or Microdrive is that the data will be lost as soon as the

power is switched off or the reset button is pressed. It will also be as good as lost if you type SPECTRUM. Always

save your work to cassette or Microdrive before doing any of these things. Data which has been stored in RAM will

not be affected by a NEW command.

All the commands for RAM disk storage are the same as cassette commands except that an exclamation mark (!)

must be typed after the keyword, eg

SAVE! "program" LINE 10

LOAD! "program"

SAVE! "picture" SCREEN$

LOAD! "physics" DATA p()

MERGE! "overlay"

The VERIFY keyword is not used with the RAM disk.

You can get an alphabetic catalogue of all the files (programs and data) saved in RAM by typing

CAT!

Individual files can be removed by typing

ERASE! "filename"

MUSIC AND SOUND

The Spectrum 128 has two different ways to make music and sound effects. Both work through the sound channel of

your TV or can be sent to an external amplifier as explained on page 3. There is no internal speaker.

The first method uses the Spectrum BASIC BEEP command (see pages 36-37 and 53 of the ZX Spectrum User

Guide). But 128 BASIC also has the PLAY command which allows you to make sophisticated music with up to three

notes at once. It also gives you more control over the sound of each individual note than is possible using BEEP.

The PLAY command can be used to let your Spectrum 128 play tunes on many types of synthesizer and other

electronic musical instruments, such as drum machines. The Spectrum 128 is MIDI (Musical Instrument Digital

Interface) compatible, which allows it to be connected to any other equipment which conforms to the MIDI standard.

Programming sounds

Making music and sound effects with PLAY is simple. You just type in the series of notes that make up a tune, then

ask the Spectrum 128 to PLAY them. You can also include instructions that tell the Spectrum 128 what sort of tone

you want for the sound.

To hear some of the wide range of sounds that you can make, type in one of the two programs below, RUN it, then

try the other example, Don't worry if the program lines look complicated, they are explained in detail later

MUSIC

10 LET a$="T180O6(CDEC)(5EF7G)(3GAGF5EC)5Cg7C9CgC"

20 LET b$="O4(CDEC)(5EF7G)(3GAGF5EC)5Eb7E9EbE"

30 LET c$="O3(7CG)(7CG)(7CG)5GD7G9GDG"

40 PLAY a$,b$,c$

Please purchase VeryPDF HTML Converter on http://www.verypdf.com to remove this watermark.

Brand	Sinclair
Model	ZX Spectrum 128
Category	Desktop
Language	English

Sinclair ZX Spectrum 128 User Manual

Table of Contents

Other manuals for Sinclair ZX Spectrum 128

Questions and Answers:

Sinclair ZX Spectrum 128 Specifications

Related product manuals