- 5 -
CZ sincro
DG83 D
V
2
4
RESET
STROBOTESTER DG 83-D
min.
V=
C – C +
TDC MARKS ALIGNER
TL17 Cables for ground connections
AD 33A Needle for picking up signals
Fig.1
2.1 DISPLAY
2.2 COMMANDS POSITION
2.3 OPTIONAL ADAPTERS
Key C +/–
Adjust
Selection
D key
Flashing
Memory
Switching
Confirmation
TL 220 Advance/Volt/
Dwell cable
Fig.2
LED 1 RPM
Display
RPM, Advance, Dwell, Volt
Volts /Dwell in milliseconds /
percentage / degrees
LED 4
Direct and peak voltage
LED 2
Advance
Spark/rev.
selection
Reset of the unit
2/4
Strokes
TL 200 Power supply cable
Advance
decrease
Advance
increase
LED 3
Dwell (Duty Cycle)
To Next Page
Loading...