21
Start/End G-code
View default settings for start/end code, modify text to apply to sliced model.
Import/Export Profile
This function allows user to import predefined profile parameter values or export values for slicing.
File format for profile is *.ini and editing is available through “notepad”.
2X/2X DP303, 5X and 7X perform Import/Export by cartridge.
Reset Profile
Resets all profile parameter values to default value.
View
Able to choose viewing mode that is equivalent to features of View Mode Selection button. For more
details, please refer to “2.4 View Mode Selection button” on page.11.
To Next Page
Loading...
