Singer 20U-105C - Page 16

13
Figure 1
5
Hold bobbin case by latch ‘1’ and
place it on spindle of bobbin case
holder ‘2’ so that position finger ‘3’
enters notch ‘4’ at right of bobbin
case holder (see Figure 12).
Release latch and press bobbin case
firmly in place to assure proper
position. Close bed slide.
Caution
Switch off the
machine.
Do not run
machine with-
out closing bed
side. Danger of
injury!
1
3
4
2
Zigzag Sewing Machine
|
Instruction Manual and Parts List