Singer 4432 - 2 Removing Methods Of External Parts; Sewing Table; Face Plate; Base Cover


2. Removing methods of external parts
2-1 Sewing table
Keep the snap-in sewing table horizontal, and
pull it in the direction of the arrow. (1)
2-2 Face plate
- Remove the operation cover (a).
- Loosen the screw (b) and remove the face
plate. (2)
2-3 Base cover
- Lay down machine.
- Remove the screws (c, d, e, f, g, h). (3)
- Remove the base cover.
2-4 Free arm base
Remove the screws (i, j) and remove the free
arm base. (4)
Free arm base
Base cover