32
STRETCH OVEREDGE STITCH
With this stitch you can stitch and finish a seam in one step. It
is also ideal for finishing seams, hems and facings requiring
s t r e t c h .
OVEREDGE SEAM
• Trim seam edge 1/4" (6mm) from position you wish your
s e a m .
RECOMMENDED SETTINGS
Stitch Selection: Stretch Overedge Stitch
Stitch Width:
Stitch Length:
F o o t : Special Purpose (J )
Needle Plate: General Purpose (A)
Adjust balance, if necessary
• Position trimmed seam under presser foot, as shown.
• Straight stitches should fall on seam line; zig-zag stitches
should fall over seam edge.
• On 8 stitch machine you may create a straight stretch stitch,
by setting stitch width to the left.
To Next Page
Loading...
