27
We reserve the right to change the machine equipment and the assortment of accessories
without prior notice, or make modications to the performance or design.
Such modications, however, will always be to the benet of the user and the product.
Intellectual property
SINGER, the Cameo “S” Design, ORIGINAL SINCE 1851 is exclusive trademarks of The Singer
Company Limited S.à.r.l. or its Afliates.
The Seam has Uneven Stitches
Is the thread tension correct? Check needle thread tension and the threading.
Are you using too thick or slubbed thread? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly, see page 15.
The Machine does not Feed or Feeds Irregularly
Did you thread the machine properly? Check how the machine is threaded.
Has sewing lint collected between the feed teeth? Remove the stitch plate and clean the feed teeth with a
brush.
The Main Motor Becomes Overloaded
Has the thread become twisted or jammed in the bobbin
case area or the feed teeth?
Remove the stitch plate and clean threads and lint from
the feed teeth and bobbin case area.
Re-thread the machine, both top and bobbin threads.
Please note that on disposal, this product must be safely
recycled in accordance with relevant National legislation
relating to electrical/electronic products. Do not dispose
of electrical appliances as unsorted muncipal waste, use
separate collection facilities. Contact your local government
for information regarding the collection systems available.
When replacing old appliances with new ones, the retailer
may be legally obligated to take back your old appliance for
disposal free of charge.
If electrical appliances are disposed of in landlls or dumps,
hazardous substances can leak into the groundwater and get
into the food chain, damaging your health and well-being.
To Next Page
Loading...
