Singer C440 - Sewing: Buttonhole Completion; Buttonhole Finishing Steps

34
Sewing
7. Machine will sew the buttonhole in the order as shown and
stop automatically after sewing.
1 2 3 4 5 6
1 2 3 4
1 2 3 4 5
8. Raise the presser foot to remove the fabric.
9. Use a seam ripper to cut open the center of the buttonhole,
being careful not to cut into the ends of the buttonhole. It is
helpful to place a pin at the end of the buttonhole to serve
as a stopper while cutting.
NOTE: For sewing buttonholes on projects such as hard-to-
sew fabrics or along the edge of multi-layered garments, install
the underplate. Place the fabric between the underplate and
Buttonhole Foot.
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4 5
1 2 3
1 2 3 4 5
1 2 3 4 5